2way-air-lead

(15) With the system plumbing completed, it’s time to build the whips. Simply measure from the Schrader valve on the vehicle to the Schrader valve on the tire at its farthest possible point, then cut the material. A tubing cutter designed specifically for this purpose is offered through RSE for $9.95. You can use a razor if you want, but the cut must be absolutely straight to ensure a leak-free seal. Once cut to length, simply direct the tubing into the push-to-connect adapters installed in the quick-connect fittings. RSE applies Teflon tape for the adapter fittings from the factory. (16) Whenever a tire or tires are to be inflated (or in this case inflated/deflated), simply connect the whip to the Schrader valve on the vehicle and tire, and turn clockwise until they lock — about a quarter-turn.
- Advertisement -

Products

Carefree of Colorado’s Awning Extend’r can be installed on manual or electric awnings. When staked down, the straps not only support the extension canopy but also help stabilize the existing patio awning from the wind.

Made for Shade: Carefree Awning Extend’r

Carefree’s easy-to-install fabric Awning Extend’r can nearly double canopy coverage In one way or another, RVers seem to be in a constant battle against the...

Solar Charged: Victron System from AM Solar

Keeping batteries charged while dry camping can be a challenge unless an AC generator is powered up. A smart alternative is a Victron Complete...

Pump Up the Volume: Flow Max Water Pump

Larger RVs sometimes have issues with good water pressure in fixtures farthest away from the freshwater tank and pump. Duraself’s 12-volt DC Flow Max...