Awning-03

4) Use a pair of Vise-Grip pliers to hold the spring assembly while removing the bolt that holds the upright in place. 5) Mark the direction that you will need to wind the spring assembly before unwinding it. 6) Use the old fabric as ground cover to keep the new fabric clean during installation.
10) Before removing the fabric from the roller tube, mark the slot where the fabric slides.
- Advertisement -

Products

Carefree of Colorado’s Awning Extend’r can be installed on manual or electric awnings. When staked down, the straps not only support the extension canopy but also help stabilize the existing patio awning from the wind.

Made for Shade: Carefree Awning Extend’r

Carefree’s easy-to-install fabric Awning Extend’r can nearly double canopy coverage In one way or another, RVers seem to be in a constant battle against the...

Solar Charged: Victron System from AM Solar

Keeping batteries charged while dry camping can be a challenge unless an AC generator is powered up. A smart alternative is a Victron Complete...

Pump Up the Volume: Flow Max Water Pump

Larger RVs sometimes have issues with good water pressure in fixtures farthest away from the freshwater tank and pump. Duraself’s 12-volt DC Flow Max...