durango-Specs

Outdoor Adventure Box
If the termination valve sticks or leaks, it may need to be serviced. Here, a valve is disassembled. The two flanges will be glued to the pipe on the RV, and the gaskets seated. The valve can be cleaned and then lubricated with valve grease, such as Dow Corning Molykote 111. Once the valve is working well, the new gaskets are installed on the flanges. The pipes are manually pried apart for the valve to slide in between (a helper makes this easier), and the four bolts are installed.
- Advertisement -

Products

Slick Moves

Proper RV maintenance is a must, but finding the right products to keep everything in working order isn’t always easy. A simple way to...

Banner Idea

The task of keeping the front cap on a fifth-wheel trailer clean while on the road can be overwhelming since insects, dirt and other...

Remote Monitor Your RV with Bluestream Sensor

Bluestream, a $50 Bluetooth sensor tracks the temperature, humidity and motion inside an RV and monitors conditions via a mobile app Do you take your...