RoofAirLeak3

Outdoor Adventure Box
(4) The tie-down bolts holding the air conditioner in place can be quite long, so we opted to use a cordless drill for removal. (5) Apply steady upward pressure to break the air-conditioner gasket loose from the roof material. (6) This particular roof sagged a little bit and water had pooled under the air-conditioning unit. Be sure to remove any excess water before continuing on with the repair.
(11) When installing the new air-conditioner gasket, peel the tape backing off carefully. Once the gasket touches the surface, it’s pretty well set into place. (12) Make sure you install the rear spacer that is supplied in the air-conditioner-gasket set. (13) With the new gasket installed, set the air conditioner in place and line up the bolt holes from the inside.
- Advertisement -

Products

A happy camper demonstrates the Skreenz, vehicle screens for RVs

Staff Pick: Skreeenz Vehicle Screens

We love camping but don’t love biting bugs. To keep them out of our Class B motorhome, we ordered Skreenz, tough-as-nails mesh insect screens...
closeup of butterfly on a flower

Sponsored Content: Tamron’s Vibration Compensation Is Key to Performance of 18-400 Zoom

With its 22.2x zoom, versatile focal-length range, and maximum magnification ratio of 1:2.9, the Tamron 18-400 all-in-one ultra-telephoto zoom allows you to shoot everything...
The Micro-Air EasyStart system

Micro-Air EasyStart: This Is Cool!

Micro-Air’s EasyStart reduces the power requirement to start and run rooftop air conditionersA frustration that trailerists have been grappling with for decades is the...