Step 10: The control wire loom harness from the VVB in-cab control switch plugs into the BD module. The module can then be mounted about anywhere. Best place to mount it is on the auxiliary battery cover using strips of hook-and-loop fastener to hold it in place.

Outdoor Adventure Box

Step 10: The control wire loom harness from the VVB in-cab control switch plugs into the BD module. The module can then be mounted about anywhere. Best place to mount it is on the auxiliary battery cover using strips of hook-and-loop fastener to hold it in place.

Step 9: Follow BD’s instructions related to the insertion of additional wires into the loom coming from the dash controller to the plug that goes into the control box. They are well marked and easy to install.
Step 11: The last step is to attach the BD control box power wire to the auxiliary battery per the instructions. It really is a simple install/upgrade.
- Advertisement -

Products

A happy camper demonstrates the Skreenz, vehicle screens for RVs

Staff Pick: Skreeenz Vehicle Screens

We love camping but don’t love biting bugs. To keep them out of our Class B motorhome, we ordered Skreenz, tough-as-nails mesh insect screens...
closeup of butterfly on a flower

Sponsored Content: Tamron’s Vibration Compensation Is Key to Performance of 18-400 Zoom

With its 22.2x zoom, versatile focal-length range, and maximum magnification ratio of 1:2.9, the Tamron 18-400 all-in-one ultra-telephoto zoom allows you to shoot everything...
The Micro-Air EasyStart system

Micro-Air EasyStart: This Is Cool!

Micro-Air’s EasyStart reduces the power requirement to start and run rooftop air conditionersA frustration that trailerists have been grappling with for decades is the...