Step 9: Follow BD’s instructions related to the insertion of additional wires into the loom coming from the dash controller to the plug that goes into the control box. They are well marked and easy to install.

Step 9: Follow BD’s instructions related to the insertion of additional wires into the loom coming from the dash controller to the plug that goes into the control box. They are well marked and easy to install.

Step 8: Push plugs back in and push down on levers to lock in.
Step 10: The control wire loom harness from the VVB in-cab control switch plugs into the BD module. The module can then be mounted about anywhere. Best place to mount it is on the auxiliary battery cover using strips of hook-and-loop fastener to hold it in place.
- Advertisement -

Products

Handy Hitch Tote

It’s hard to find a good location to store a cumbersome weight-distribution ball mount and spring bars where they are easy to access yet...

Steered Straight

Full-size Chevy and GMC pickups, vans and SUVs from 2001 to 2010 may suffer from lazy steering, inducing premature component and tire wear as...

See the Light

Having extra illumination in and around the RV is always handy, particularly in the dark recesses of closets, cabinets and exterior storage compartments. Light...