Awning-04

Outdoor Adventure Box
7) Use a 3/16-inch bit to drill out the rivets holding the spring assemblies in place. 8) Before removing each spring assembly, mark the end and the roller tube for reinstallation. 9) Pull the spring assembly away from the roller and set aside for later installation.
14) Carefully roll the new fabric in the proper direction onto the roller tube. 15) Use 3/16-inch-long aluminum rivets to secure the spring assemblies into place. 16) Using a pair of long-nose pliers, spread the opening of the awning rail to prevent the fabric from the snagging during installation.

Products

Cummins Onan P4500i and P2500i

Carry-Out Power

With a new pair of portable inverter generators, Cummins Onan enters the market in a big way The year was 1961, and Onan produced the...
Camping World Zig Zag Zero Gravity Recliner

Staff Pick: Zig Zag Zero Gravity Recliner

A big part of RVing is relaxing, and finding just the right chair makes down time so much better. It’s hard to beat the...
HitchGrip Hitch-Ball Mount Carrier on hitch ball

HitchGrip Hitch-Ball Mount Carrier

My husband does the hooking and unhooking of our travel trailer when we go camping. He always complains about having to use gloves to...