DumpStation-89

13) The tank is secured to the ladder with the included cinch-strap. It sits nicely on the bracket, with tabs on the tank (inset) that help secure it to the arms.
5) When the level rises, close the RV’s termination valve. While keeping the end of the hose elevated above the tank, replace the cap, collapse the hose and secure the compartment. Close the AutoStop gauge hatch and proceed to the dump station. 6) Once at the dump station, open the compartment and remove the hose, keeping it elevated; do not open the AutoStop gauge compartment yet. Remove the cap, attach the elbow and place the donut in the sewer connection. While keeping the center section of the hose elevated to help prevent flow, place the elbow in the sewer connection, then depress the center section of the hose to allow free flow of the contents. Open the AutoStop gauge hatch to vent. 7) Once the tank has dumped, open the rinse door and fill the inside of the tank with the water hose, then tilt the tank up to drain the last bit out of the tank, and you’re done.
10, 11, 12) The arms lock straight out for carrying the tank and to the outsides for climbing the ladder. When the tank isn’t mounted, the arms remain unlocked, folded inward and strapped down. 13) The tank is secured to the ladder with the included cinch-strap. It sits nicely on the bracket, with tabs on the tank (inset) that help secure it to the arms.

Products

Cummins Onan P4500i and P2500i

Carry-Out Power

With a new pair of portable inverter generators, Cummins Onan enters the market in a big way The year was 1961, and Onan produced the...
Camping World Zig Zag Zero Gravity Recliner

Staff Pick: Zig Zag Zero Gravity Recliner

A big part of RVing is relaxing, and finding just the right chair makes down time so much better. It’s hard to beat the...
HitchGrip Hitch-Ball Mount Carrier on hitch ball

HitchGrip Hitch-Ball Mount Carrier

My husband does the hooking and unhooking of our travel trailer when we go camping. He always complains about having to use gloves to...