Shown is a Torklift StableLoad Quick Disconnect in the engaged position. Rotating the stabilizer 90 degrees disengages it.
stableload Drill Tool Torklift’s rental tool makes fast work of drilling through the lower overload spring on vehicles that don’t come from the factory with the holes. Turning a bolt in the bottom of the tool applies upward pressure on the cradle, pressing the cobalt drill bit into the spring with the needed force and requiring little effort by the installer. A ratchet wrench and socket are used to turn the bolt. The tool is free to rent but requires a $150 refundable deposit and shipping fees in both directions.
- Advertisement -


A happy camper demonstrates the Skreenz, vehicle screens for RVs

Staff Pick: Skreeenz Vehicle Screens

We love camping but don’t love biting bugs. To keep them out of our Class B motorhome, we ordered Skreenz, tough-as-nails mesh insect screens...
closeup of butterfly on a flower

Sponsored Content: Tamron’s Vibration Compensation Is Key to Performance of 18-400 Zoom

With its 22.2x zoom, versatile focal-length range, and maximum magnification ratio of 1:2.9, the Tamron 18-400 all-in-one ultra-telephoto zoom allows you to shoot everything...
The Micro-Air EasyStart system

Micro-Air EasyStart: This Is Cool!

Micro-Air’s EasyStart reduces the power requirement to start and run rooftop air conditionersA frustration that trailerists have been grappling with for decades is the...