6_DSC_0836

Once the truck is stabilized on a level surface and blocked safely, the rear is lifted to allow the axle to hang.
Once the lower bracket orientation is established (different between diesel- and gasoline-powered trucks), the bracket is positioned over the axle. It is secured with a large U-bolt, and the lower spring section is bolted in place.
Lifting the front and allowing the axle to hang will provide good access to the factory jounce bumper (arrow). It can be removed by hand using a firm grip and a twisting, pulling motion. If the bumper is too tight, it can be encouraged with a large flat-blade screwdriver.

Products

SalVinCo Vance RV reading light with integrated USB port

Vance Reading Light with Integrated USB Port

The Vance Reading Light from SalVinCo features a convenient USB port integrated into the 3.2-inch-diameter base of the flex-neck fixture for handy charging of...
Garmin RV 890 MT-S GPS Navigator

Garmin RV 890 MT-S GPS Navigator

Garmin, and its latest model, the Android-based RV 890 MT-S tablet, take technology further than any GPS has before. The new RV GPS’s 8-inch...
Camco portable Little Red Campfire

Camco Portable Little Red Campfire

Some purists may not agree with having a propane-powered campfire, but Camco’s Portable Little Red Campfire is a great choice where campfires aren’t allowed....