6_IMG_0577

The weBoost Drive 4G-X RV comes in a series of boxes that make it easy to plan the installation. Instructions are simple, direct and ideal for do-it-yourselfers.
The antenna was installed on the ladder, the cable was routed through the hole, and the cover was placed and sealed. Zip-tie clamps attach the cable neatly to the trailer, with a loop for runoff so moisture can’t get into the wall.
The base unit was wired to the 12-volt DC system, so it is always on; a solar-charging system prevents battery discharge. When the trailer is in storage, the power cord is unplugged from the base unit, but a power switch could have been installed or the 120-volt AC adaptor could have been plugged into an adjacent receptacle.

Products

Cummins Onan P4500i and P2500i

Carry-Out Power

With a new pair of portable inverter generators, Cummins Onan enters the market in a big way The year was 1961, and Onan produced the...
Camping World Zig Zag Zero Gravity Recliner

Staff Pick: Zig Zag Zero Gravity Recliner

A big part of RVing is relaxing, and finding just the right chair makes down time so much better. It’s hard to beat the...
HitchGrip Hitch-Ball Mount Carrier on hitch ball

HitchGrip Hitch-Ball Mount Carrier

My husband does the hooking and unhooking of our travel trailer when we go camping. He always complains about having to use gloves to...