4_BuggBanner_0465

1) The first step is finding the proper mounting locations for the blocks. They are mounted on the sides of the front cap.
2, 3) Once the location is finalized, the surface is cleaned with 50/50 alcohol and water, and the rope threaded through the block. The blocks and rope are taped in place temporarily to confirm that the placement will work.
5) The screws are then driven into the front cap.

Products

Cummins Onan P4500i and P2500i

Carry-Out Power

With a new pair of portable inverter generators, Cummins Onan enters the market in a big way The year was 1961, and Onan produced the...
Camping World Zig Zag Zero Gravity Recliner

Staff Pick: Zig Zag Zero Gravity Recliner

A big part of RVing is relaxing, and finding just the right chair makes down time so much better. It’s hard to beat the...
HitchGrip Hitch-Ball Mount Carrier on hitch ball

HitchGrip Hitch-Ball Mount Carrier

My husband does the hooking and unhooking of our travel trailer when we go camping. He always complains about having to use gloves to...