9_BuggBanner_0480

1) The first step is finding the proper mounting locations for the blocks. They are mounted on the sides of the front cap.
8) Carabiners at the ends of the hoist ropes are used to secure the top grommets in the Bugg Banner. A foam guard is placed over each carabiner to prevent damage to the front-cap surface.
10) Before positioning the cam cleat at the bottom front section of the fifth-wheel, the rope is taped into place so that it is straight up and down

Products

Cummins Onan P4500i and P2500i

Carry-Out Power

With a new pair of portable inverter generators, Cummins Onan enters the market in a big way The year was 1961, and Onan produced the...
Camping World Zig Zag Zero Gravity Recliner

Staff Pick: Zig Zag Zero Gravity Recliner

A big part of RVing is relaxing, and finding just the right chair makes down time so much better. It’s hard to beat the...
HitchGrip Hitch-Ball Mount Carrier on hitch ball

HitchGrip Hitch-Ball Mount Carrier

My husband does the hooking and unhooking of our travel trailer when we go camping. He always complains about having to use gloves to...