King-Quest- detail
1) The dome was mounted close to the air conditioner, which was contrary to the installation instructions. At this point, the roofline is not level, exceeding the limit suggested in the instructions. However, the antenna performed better than expected in this location. 2) After discovering a kink and slice in the factory coax that prevented the Quest from operating, the cable was cut to make way for better-quality RG-6 coax. 3) To repair the factory coax, the wire was stripped using a tool acquired at a home-improvement store.
4) We purchased high-quality RG-6 coax and connectors online. 5) The connectors were crimped on the cables using the proper tool. 6) A coax butt connector was used to mate the cables.


Cummins Onan P4500i and P2500i

Carry-Out Power

With a new pair of portable inverter generators, Cummins Onan enters the market in a big way The year was 1961, and Onan produced the...
Camping World Zig Zag Zero Gravity Recliner

Staff Pick: Zig Zag Zero Gravity Recliner

A big part of RVing is relaxing, and finding just the right chair makes down time so much better. It’s hard to beat the...
HitchGrip Hitch-Ball Mount Carrier on hitch ball

HitchGrip Hitch-Ball Mount Carrier

My husband does the hooking and unhooking of our travel trailer when we go camping. He always complains about having to use gloves to...