05_13-AquaHotInstall0434

How It Works Interior Heating: Specially formulated antifreeze is heated by the burner in the main heating unit (left). A circulation pump pushes the hot antifreeze to each heat exchanger using a closed-loop system of tubing. When a zone calls for heat, the exchanger fan comes on, pushing hot air. Cooled antifreeze returns to the burner plenum for reheating. HOT WATER: In the hot-water system (right), potable water is heated through an isolated loop, requiring no tank. The water runs through the coil where it is heated and flows, on demand, to the RV’s faucets.
5-9) A hole is cut for the flange, and the new Aqua-Hot 250P unit is set in place, allowing for the exhaust pipe to be connected.

Products

SalVinCo Vance RV reading light with integrated USB port

Vance Reading Light with Integrated USB Port

The Vance Reading Light from SalVinCo features a convenient USB port integrated into the 3.2-inch-diameter base of the flex-neck fixture for handy charging of...
Camping World Zig Zag Zero Gravity Recliner

Staff Pick: Zig Zag Zero Gravity Recliner

A big part of RVing is relaxing, and finding just the right chair makes down time so much better. It’s hard to beat the...
HitchGrip Hitch-Ball Mount Carrier on hitch ball

HitchGrip Hitch-Ball Mount Carrier

My husband does the hooking and unhooking of our travel trailer when we go camping. He always complains about having to use gloves to...