Home RV Home Theater Furrion-1113

Furrion-1113

1) The original entertainment system, which consisted of a basic DVD stereo and a TV held to the wall with a vinyl strap for transit, was adequate but needed to be updated. 2) Removing the stereo revealed the wiring harness and RCA connections to the factory-installed TV. These had to be changed to a new harness, and an HDMI cable was added for the HDMI-ARC feature. 3) The original TV has a basic nonlocking articulating mount that didn’t reach out far enough for good viewing from the couch or the theater seating. Also, there wasn’t enough wiring for the entertainment system to connect to the TV.
7) The finished TV installation required moving the receptacles and cutting the stone facade. We filled in the remaining holes with putty later. The large hole in the panel was disguised with matching laminate tape acquired from an RV-surplus store. 8) Rewiring the stereo head was easy but required modification because the new unit had two speaker zones instead of three, which required adding a Pyle PVCS2 speaker switch. 9) Once the speaker switch was installed, the living room speaker bars were on “A” and the bedroom and outside speakers were on “B,” further split on the Pyle switch and marked. 10) The Furrion speakers can be hardwired or connected using the included spade terminals.
furrion-lead

Products

Camping World Zig Zag Zero Gravity Recliner

Staff Pick: Zig Zag Zero Gravity Recliner

A big part of RVing is relaxing, and finding just the right chair makes down time so much better. It’s hard to beat the...
HitchGrip Hitch-Ball Mount Carrier on hitch ball

HitchGrip Hitch-Ball Mount Carrier

My husband does the hooking and unhooking of our travel trailer when we go camping. He always complains about having to use gloves to...
KING Exten Cellular Booster

KING Extend Cellular Booster

Do you find yourself at a campground with dropped cell-phone calls and internet speed as slow as a snail? If so, the KING Extend...