Home RV Home Theater Furrion-13

Furrion-13

1) The original entertainment system, which consisted of a basic DVD stereo and a TV held to the wall with a vinyl strap for transit, was adequate but needed to be updated. 2) Removing the stereo revealed the wiring harness and RCA connections to the factory-installed TV. These had to be changed to a new harness, and an HDMI cable was added for the HDMI-ARC feature. 3) The original TV has a basic nonlocking articulating mount that didn’t reach out far enough for good viewing from the couch or the theater seating. Also, there wasn’t enough wiring for the entertainment system to connect to the TV.
4) The framed wall, designed for the old TV mount, was modified for the new mounting bracket, which attached to the wall in the center behind the TV. We stripped the wall and added a 2x6-inch board for this modification. We used 2x6 lumber because that was what the manufacturer had used in the wall, but the TV is light, and smaller dimensioned lumber could have been used. 5) Upon opening the wall, we found bad coax connections that were the source of an annoying static condition. We replaced all the connections with professional-grade RG-6 connectors. 6) Additional HDMI cables were routed to the entertainment center; one existing cable was reused, along with the component cables for connecting to the system components, including the Furrion stereo.

Products

Cummins Onan P4500i and P2500i

Carry-Out Power

With a new pair of portable inverter generators, Cummins Onan enters the market in a big way The year was 1961, and Onan produced the...
Camping World Zig Zag Zero Gravity Recliner

Staff Pick: Zig Zag Zero Gravity Recliner

A big part of RVing is relaxing, and finding just the right chair makes down time so much better. It’s hard to beat the...
HitchGrip Hitch-Ball Mount Carrier on hitch ball

HitchGrip Hitch-Ball Mount Carrier

My husband does the hooking and unhooking of our travel trailer when we go camping. He always complains about having to use gloves to...