11_DSC_0974

1) Jack stands are needed to support the frame and allow the suspension to hang. The trailer must not be lifted by the axles, which are stabilized only with floor jacks.
10) Before mounting the center box over the original equalizer hanger, it may be necessary to unbolt the LP-gas line on one side of the trailer and move it out of the way slightly
2) In most cases, a piece of the underbelly material will have to be cut with a utility knife and removed from the frame to allow the center box to be seated properly. When the project is finished, the underbelly can be resealed with spray-foam insulation.

Products

Cummins Onan P4500i and P2500i

Carry-Out Power

With a new pair of portable inverter generators, Cummins Onan enters the market in a big way The year was 1961, and Onan produced the...
Camping World Zig Zag Zero Gravity Recliner

Staff Pick: Zig Zag Zero Gravity Recliner

A big part of RVing is relaxing, and finding just the right chair makes down time so much better. It’s hard to beat the...
HitchGrip Hitch-Ball Mount Carrier on hitch ball

HitchGrip Hitch-Ball Mount Carrier

My husband does the hooking and unhooking of our travel trailer when we go camping. He always complains about having to use gloves to...