17_DSC_0998

1) Jack stands are needed to support the frame and allow the suspension to hang. The trailer must not be lifted by the axles, which are stabilized only with floor jacks.
6) Holes for the 3⁄8-inch self-tapping bolts provided to secure the box to the frame must be drilled first. An easy way to start this process is to use a 1⁄8-inch self-drilling (Tek) screw to make smaller pilot holes and keep the box from moving.
18) Red thread sealer is used on the self-tapping bolts ...

Products

Camco portable Little Red Campfire

Camco Portable Little Red Campfire

Some purists may not agree with having a propane-powered campfire, but Camco’s Portable Little Red Campfire is a great choice where campfires aren’t allowed....
Cummins Onan P4500i and P2500i

Carry-Out Power

With a new pair of portable inverter generators, Cummins Onan enters the market in a big way The year was 1961, and Onan produced the...
Camping World Zig Zag Zero Gravity Recliner

Staff Pick: Zig Zag Zero Gravity Recliner

A big part of RVing is relaxing, and finding just the right chair makes down time so much better. It’s hard to beat the...